Crochet Blanket Yarn Calculator

Estimate how much yarn you need for a crochet blanket using a measured swatch, your planned blanket size, and the yardage or weight of each skein.

1. Blanket dimensions
2. Swatch measurements

Use the same yarn, hook, stitch pattern, and tension as your blanket.

3. Yarn and allowance

Use the same unit for the swatch and the skein. When weighing the swatch, enter the net yarn weight on the skein label.

Your estimate will appear here. The starting values match the worked example below.

How to use the calculator

Enter the width and length of the blanket fabric you want to estimate. If a separate border adds 2 inches on each side, subtract 4 inches from each finished dimension before estimating the center. Use the Crochet Blanket Size Chart to compare typical project dimensions.

How to measure yarn used in a swatch

Crochet several complete repeats using the same yarn and hook you plan to use. Wash and block the sample as you will the blanket. Let it dry, lay it flat without stretching, and measure the width and height of the same piece whose yarn you are counting.

A 10 by 10 inch swatch shown next to a proportional 40 by 60 inch blanket divided into 24 equal areas

Measure by length or weight

For yards or meters, unravel the sample and measure the yarn used without stretching it. For grams, weigh the dry swatch on a scale and match it to the net weight on the label. A larger swatch helps if your scale rounds to whole grams. If you change yarn thickness, check the Yarn Weight Chart and make a new sample.

Example skein label showing 100 grams net weight and 220 yards, beside a measured swatch

How the yarn calculation works

Multiply width by length for the blanket and swatch, using the same dimension unit for both. Divide the blanket area by the swatch area, multiply by the swatch yarn, then add your allowance. Divide by the amount per skein and round up to the next whole skein.

Worked example

A 40 × 60 in blanket covers 2,400 sq in. A 10 × 10 in swatch covers 100 sq in and uses 50 yd. The scale factor is 24, so the base estimate is 1,200 yd. A 10% allowance adds 120 yd, for 1,320 yd total. At 200 yd per skein, 1,320 ÷ 200 = 6.6, so buy 7 skeins.

Common blanket dimensions

Use these as starting points and adjust the size for your project.

BlanketInchesCentimeters (approx.)
Baby30 × 4076 × 102
Lap36 × 4891 × 122
Throw50 × 60127 × 152

Why yarn estimates vary

Area scaling assumes the same stitch pattern, tension, and fabric density. Borders, joins, color changes, and partial pattern repeats can use additional yarn. Use the Crochet Gauge Calculator to check working stitch and row counts before settling on a final size.

Tips for buying enough yarn

Estimate each color separately and choose matching dye lots where available. Use the Yarn Calculator if a pattern already gives the total yardage. The blanket yarn planning guide shows how to calculate a contrasting border separately.

Frequently asked questions

How much yarn do I need for a baby blanket?

For a 30 × 40 in baby blanket and a 10 × 10 in sample, multiply the swatch consumption by 12 before adding any allowance. A different swatch can give a different estimate for the same size.

How many skeins do I need for a throw?

Use the finished size you want and the length or net weight on your label. A 50 × 60 in throw has 30 times the area of a 10 × 10 in swatch. Multiply the sample consumption by 30, add allowance, then divide by the amount per skein and round up.

Does stitch type change yarn consumption?

Yes. A dense textured fabric and an open mesh can use different amounts of yarn over the same area. Measure a full repeat of the stitch pattern you will use.

What if I do not have a swatch?

Start with the yardage published for your pattern and size if you are using the recommended yarn and matching gauge. If you are changing the yarn or stitch, make a swatch before relying on an estimate.

Should I buy extra yarn?

Use 10% as a starting allowance and adjust it for your project. Plan separately for any substantial border, seams, or contrast colors, and round each color up to whole skeins.

Can I use grams instead of yards?

Yes. Weigh the dry swatch, enter its weight in grams, then enter the net grams per skein from the label. The estimate stays in grams.

Browse all crochet calculators