How to use this calculator
Count stitches and rows over a measured span away from the swatch edges. Enter all dimensions in the same unit.
How the formula works
Divide stitches by the measured width and rows by the measured height. Multiply by the desired width and height, respectively, and round each count to a whole number. To estimate the size after rounding, divide each rounded count by its measured gauge.
Worked example
At 14 stitches and 12 rows per 4 in, a 30 × 40 in panel needs about 105 stitches and 120 rows. If your width gauge is 13 stitches per 4 in instead, 30 in calls for 97.5 stitches. Round to 98 to get an estimated width of 30.15 in.
When the estimate may be inaccurate
Rounding can change finished size. Repeat patterns or shaping require the pattern’s own instructions.
Practical tip
Make a swatch larger than the area you plan to measure. Wash and dry it as you will the finished piece. Lay it flat and count over the center. For textured stitches, include complete repeats as your pattern defines them.
FAQ
Can stitch and row gauge differ?
Yes. Count both axes separately and measure each span.
What if I measured different spans across and down?
Enter each measured span separately. If you count 18 stitches across 5 in and 12 rows over 4 in, a 30 × 40 in panel takes about 108 stitches and 120 rows.
What if my pattern calls for a multiple of six plus two?
If gauge suggests 105 stitches, the neighboring compatible counts are 104 and 110. At 14 stitches per 4 in, they give about 29.71 and 31.43 in. Compare the counts in the Stitch Calculator and check your pattern for turning chains.
What if I get more stitches per inch than the pattern?
Your stitches are smaller than the pattern gauge. Try a larger hook if the resulting fabric suits the project. Make a fresh swatch and measure both directions again.
Can I measure 10 cm instead of 4 inches?
Yes. Enter the actual span you measured. Four inches equals 10.16 cm. Use the unit selector to convert measurements you already entered.
Do I include a border in the target width?
Enter the width of the fabric you are calculating. A 30-inch blanket with a 2-inch border on both sides needs a 26-inch center. Plan a border worked in a different stitch separately.